How to Remove the AHA Camper from a Bakkie

by | Transformer, How-To | 0 comments

One of the big advantages of the AHA Camper is that it’s not permanently fixed to your bakkie. You can remove it easily and store it on the off-loading frame when you want to use your vehicle for other purposes.

Here’s the step-by-step guide:

Step 1: Position the Off-loading Frame

  • Assemble the off-loading frame and make sure it’s fully secure.
  • Park the frame directly behind your vehicle, aligned and level.
  • Ensure the fitment frame of the AHA is flush against the off-loading frame — creating one continuous sliding surface.
  • Lock the frame in place by fastening its brakes.

Step 2: Stabilise the Vehicle

  • Place the vehicle jack under the tow bar.
  • Lift it about 10 cm so the shocks cannot move upward.
  • This prevents the bakkie from “popping up” when the AHA’s weight shifts during off-loading.
    ⚠️ This step is often forgotten — but it’s essential for proper alignment.

Step 3: Unbolt and Prepare for Winching

  • Remove the two bolts on the bottom left and right (where the AHA is bolted to the fitment frame).
  • Remove the two ratchet straps on each side.
  • Attach the winch cable to the central bracket at the bottom of the AHA.
  • Begin winching the camper onto the off-loading frame, but only about half a metre. Stop here before the next step.

Step 4: Disconnect the Electricals

  • Unplug the Brad Harrison connection at the back of the bakkie.
  • Once disconnected, continue winching until the AHA is fully on the off-loading frame.
  • Use the ratchet straps again to secure the AHA to the off-loading frame.

Step 5: Release and Move

  • Disconnect the off-loading frame from the vehicle.
  • Lower the jack and release the brakes of the frame.
  • You can now safely move the frame and camper to your storage space.

Important Tips

  • Always work on a flat, hard, and level surface.
  • Once the AHA is on the off-loading frame, remember to fasten the wheel brakes before moving it.

Final Thought

With a bit of practice, off-loading your AHA Camper becomes a quick, straightforward process. Soon you’ll be able to switch between camper mode and everyday bakkie use in no time.